Do-It-Yourself Outdoor Camp Showers

Do-It-Yourself Outdoor Camp Showers

If you’re intending with an outdoor trip or go camping with the family, this is a nice idea to pack it a camp shower or even an outdoor shower which is comfortable. Keeping yourself clean has already been a challenge when a camp. Nowadays, finances a lot of companies that supply ready-made outdoor camping showers. However, preparing your camping shower is a fun activity and also, helps save money.

How to Build Outdoor Camping Showers

In building a sample outdoor camp shower, the type of material needed is eight 3-way connectors, 9 items of 1-foot PVC pipes, 5 pieces of 5-feet PVC pipes, a garden hose, a 4 x 6 feet plastic tarp, tiebacks, a bucket as well as a drill.

The first step in building your camp shower is to develop a square by connecting several one-foot pipes and 4 three-way connectors. Following the steps above, the beds base and the surface of the shower is created. With the help in the 5-feet PVC pipes, the edges from the shower will probably be made. And so, the basic frame in our outdoor camp shower is made. The frame is then wrapped by a plastic tarp to cover it. The tie backs are then accustomed to connect the tarp towards the frame of your respective outdoor camp shower.

Do It Yourself Outdoor Camp Shower

We have 2 choices for making our camp shower. We can either make a cold-water shower or a warm-water outdoor shower for camping. The materials had to come up with a basic cold-water shower tend to be heavy-duty rubber bands, a rope, knife, 10 feet of rubber medical tubing, and a pump spray bottle of 1-gallon capacity.

The Cold-Water Camp Shower

Cut the hose that is connected to the bottle while using the knife. Also, cut the opposite end in the hose which can be connected for the spray nozzle. The purpose of cutting off the hose connected towards the bottle and spray nozzle is usually to change it while using rubber medical tubing. The rubber medical tubing should then be suited to the two nozzles and bottles. The heavy-duty rubber bands should certainly be wrapped with the points where the rubber tubing is suited. If there are no available rubber bands, duct tape or aquarium sealant may be used as alternatives.

Fill the bottle with water while using the pump of the spray nozzle. Always check for leakages the connections the location where the tubing meets the bottle and nozzle. If you do find any leakages, the rubber bands must be readjusted. After completing the steps above, the outdoor camp shower is ready to use.

Warm Water Camp Shower

To make a domestic hot water shower is very simple but needs dry and sunny weather to assist in heating the water naturally. Another alternative is employing a stove or pot to heat the river then just pouring it in the 1-gallon bottle as storage of the water.

The rest of the measures in building the hot water shower is equivalent to in the cold water shower. Following the steps above allows us to have a better knowledge of how outdoor showers for camping are manufactured.

Proper planning with decent foresight products you need to build and organizing of the required materials are required in creating a good quality outdoor camp shower. Build it on your personal or construct it with the family to own some quality time spent with your loved ones.